Brandywine

Sulzer Quadro® Mixer tips and Accessories

 

Sulzer Quadro® Retaining nuts

Sulzer Quadro® retaining nuts are used to attach the Sulzer Quadro® disposable mixers with bell inlet onto cartridges or onto two-component machines.

Part Number Type Material Suitable for use
with mixer
300 301 nut 8.7PP 7/8" x 9 PP 300 002, 300 006, 300 014, 300 018,
300.374, 300.375, 300 386, 300 387
300 302 nut 10.7PP 7/8" x 9 PP 300 022, 300.376, 300.377, 300 388,
300 389
300 303 nut 8.7PP 7/8" x 14 double lead PP 300 002, 300 006, 300 014, 300 018,
300 374, 300 375, 300 386, 300 387
300 304 nut 10.7PP 7/8" x 14 double lead PP 300 022, 300.376, 300.377, 300 388,
300 389

 

Sulzer Quadro ® Ribbon adapter

The Sulzer Quadro ® Ribbon adapter is used for dispensing wide adhesive beads. The outlet can be adjusted, stepwise, according to the specific requirement.

ribbon adapter

Part Number Type Material Suitable for use
with mixer
300 326 0.5"-1.5" PE 300 018, 300 374,
300 375, 300 386,
300 387

 

Sulzer Quadro ® Needle adapter

The Sulzer Quadro ® Needle adapter is used for the precise dispensing of small resin quantities. The outlet diameter can be adjusted, stepwise, according to the specific requirement.

needle adapter

Part Number Type Material Suitable for use
with mixer
300 363 Ø 0.8/1.6mm PP 300 006, 300 018,
300 022, 300 374,
300 375, 300 376,
300 377, 300 386,
300 387, 300 388,
300 389

 

Sulzer Quadro ® Bent mixer tip

The Bent mixer Tip is especially designed for dental applications.

bent tip

Part Number Type Material Suitable for use
with mixer
300 811 KG 5,4 PP 300 809


Sulzer Quadro ® mixer extension tube

The mixer extension tube can be used to dispense into holes or to inaccessible places.

extension tube

Part Number Type ID mm Material Length mm Suitable for use with mixer
300 812 7/195PE 7 PE 195 300 031, 300 030, 300 327 300 339,
300 823, 300 801 300 807, 301 334

 

Sulzer Quadro® Shrouds

Sulzer Quadro® shrouds are used with Sulzer Quadro® disposable mixers that are fitted with a bell inlet. The shrouds allow mixers to work at high pressures with maximum safety and performance. We suggest that Sulzer Quadro® mixers are fitted with shrouds if they are to be used at pressures above 25 bar (360psi).

shrouds

Part Number Type Material Suitable For Use With Bell Inlet Mixer Part Number
300 402 5.3/24 aluminum / stainless steel 300 002
300 406 7.5/24z aluminum 300 006
300 410 8.7/24 aluminum 300 014
300 418 8.7/24z aluminum 300 018, 300 374, 300 386
300 414 10.7/24z aluminum / brass 300 022, 300 376, 300 388
300 419 8.7/32 aluminum 300 375, 300 387
300 420 10.7/32 brass 300 377, 300 389

 

Sulzer Quadro® Perforated sleeves

The Sulzer Quadro® Perforated sleeves are used to set chemical anchors in brick and cinder block walls. The entire range of Perforated Sleeves have enhanced "ooze" holes to help insure an ideal distribution of the Adhesive over the entire length of the sleeve. This results in an extremely strong bond between the Anchor and the masonry wall. The stiffness of the perforated sleeves is very high to allow easy insertion into a drilled hole. The sleeves are made of polypropylene and are available in various sizes.

  • Ideal distribution of the Adhesive over the entire length of the sleeve
  • Closure cap in order to avoid Adhesive coming out on the front side
  • Easy to insert due to high stiffness of the sleeves

Perforated sleeves for use with chemical anchoring systems PP grey 15 x 85
15 x 130
20 x 85
12 x 50
301 257
301 255
301 259
301 253

 

Return to New Products page

Brandywine Associates
Static Mixers Brandywine Associates
Dispensers
Cartridges & Kits
Systems
Accessories
New Products
Request Form (All Products)
View Cart
Literature
Static Mixer Resources
Brandywine
Master Card and Visa are now accepted.
Paypal is now accepted